Protective Face Mask with Face and Chin Coverage and Head - Neck Ties

Unlike the face mask below this mask gives you nose, mouth and chin coverage for additional protection.
These masks are made in three layers that are robust and durable.  
The outer layer is a heavy duty waterproof PVC coated cordera type material, the middle layer is a medium weight felt that will allow for additional filtering, and the inner layer is made from light weight, soft rip stop military uniform material.  
The mask fits extremely well
It comes in about 18 colors.
In addition, there is a malleable nose piece for better fit.  
If needed, or wanted, a liner can still be added to the inside of the mask and removed and replaced as needed.  
The mask is machine washable on a gentle cycle and can be put in the dryer on a low heat.  
The best way to apply the mask is to first tie the stings around the neck, then fit the nose piece snuggly in place, and finally tie the strings behind the head near the crown.  If fitted right, you should be able to bring the top strings over the front of your face when the mask is not needed then bring them back over when it is time to wear again.  In this manner you don't have to tie and retie the mask over and over.

Two liners will come with each mask.

$18.00

  • Available
  • Delivery in 5-8 days1

Protective Face Mask with Head and Neck Ties

The current Texas Tactical Design protective face mask has an outer waterproof layer, but now instead of a second one, I have added a felt pad liner that covers the whole mouth and nose area, that should act as a slight filter as well as some softer padding, and the inner layer is still a soft, durable uniform material.
In addition, the malleable nose piece fits better.  
There have been some slight adjustments to the mask itself to reduce rubbing especially around the neck and ears.  
If needed, or wanted, the liner can still be added to the inside of the mask and removed and replaced as need.  
The mask is still washable and can be put in the dryer under medium heat.  
The masks are available in 17 colors and now only 17.50 and shipping is now included with the cost.  
The best way to apply the mask is to first tie the stings around the neck, then fit the nose piece snuggly in place, and finally tie the strings behind the head near the crown.  If fitted right, you should be able to bring the top strings over the front of your face when not needed then bring them back over when it is time to wear again.  In this manner you don't have to tie and retie the mask over and over.
Two liners will come with each mask.

$17.50

  • Available
  • Delivery in 5-8 days1

Protective Face Mask with Fitted Chin and Ear Loops

They are made in three layers robust and durable layers.  
The outer layer is a heavy duty waterproof PVC coated cordera type material, the middle layer is a medium weight felt that will allow for additional filtering, and the inner layer is made from light weight, soft rip stop military uniform material.  This fits extremely well and comes in about 18 colors.
In addition, there is a malleable nose piece for better fit.  
If needed, or wanted, a liner can still be added to the inside of the mask and removed and replaced as needed.  
The mask is washable and can be put in the dryer under low heat.  
The masks are available in 18 colors and are only 17.50 with all shipping included at no additional cost to you.  
Two liners will come with each mask.

$17.50

  • Available
  • Delivery in 5-8 days1